If you have had a home or some kind of building submerged in water, by way of either rain, or some kind of flood, then you are probably well aware of just how frustrating of a task drying it out can be. If you have not had to do this before, then you’re in luck, because here are some different ways to start drying it out.
One of the most unexpected things that can happen is a flood. And sometimes, the water can get high enough to where it can get inside of your home, or building, and drying this water out is a long arduous process. And, depending on the building, hot air drying techniques can do more harm than do help.
The very first thing you should do before drying your building out, is to make sure that there is no room for electrical hazard. You should make sure that all of the power in your home is completely off. You shouldn’t just be aware of the electrical hazards; you should keep an eye out for biological ones, because the flood water could very well be infected with human waste, chemicals, dead bodies, and countless amounts of bacteria that could cause serious medical harm. It is important that you protect your eyes, hands, mouth, and wear a respirator. You should wash your hands very thoroughly after cleaning, and once again before eating. It is recommended that you use strong disinfectant hand soap.
It is also important that you keep documentation of the damage done to your home. It is preferred that you document the damage with photos and a video camera. This will be a big help when making an insurance claim and finding out what compensation you will be eligible for.
You should also take time to make temporary repairs to prevent more water from getting into your home and causing further damage. Once again, these repairs should only be temporary.
A recommended place to begin drying out your home is the attic. If there is any wet insulation, you should remove it immediately, because it is cumbersome, and holds a lot of moisture for a long period of time causing more damage to the foundation, such as wood rot, rust, and drywall damage. It is also important to remove anything else that has water on it, or in it. You should make sure, after these measures are taken, that you keep your home cool, and that air is circulating. You might want to keep your windows open for a short amount of time, as long as it’s not raining.
Jim Corkern is a writer and promoter of quality
North Carolina Mold Remediation and other states such as
New Jersey Sewage Damage Cleanup companies across the united states.
Wednesday, October 10, 2007
Cladosporium Mold
Cladosporium mold is one of the most common and globally present molds in existence. It has around 40 species that are found in soil or on decaying organic matter and some studies that have been conducted in North America and in Europe claim that the mold is present outdoors year round, although the concentration of this mold is quite low during the winter.
In the summer, spore levels can reach from 2,000 to 50,000 particles per cubic meter of air. The air and concentration of these spores in your home are influenced by two factors: the outdoor concentration and whether the mold is growing in your house or not.
In the home, Cladosporium species manifest themselves as an infection in the walls, second to Penicillium species, Aspergillus species, and Wallemia sebi. It is prevalent on building materials that have gotten wet. The four species that occur most commonly are Cladosporium herbarum, Cladosporium sphaerospermum, Cladosporium cladosporioides, and Cladosporium macrocarpum. The spores of these molds are dispersed by air currents and are extremely common in outdoor environments; when they are found indoors, they grow on surfaces where moisture is present.
The different species of this mold that occur are not generally human pathogens unless a person’s immune system has been compromised in some way. They do, however, have the tendency to cause allergic reactions in certain people. Exposure to high levels of spores can induce asthma and chronic allergies. A concentration of 3000 spores per cubic meter of air space are usually seen as being of clinical importance. Some people may react to a lower concentration of these spores depending upon their own individual sensitivity to them. Infections of the toenails and skin can occur, along with some reports of sinusitis and some pulmonary infections, but only rarely do these occur.
These species of mold are detected quite easily in mold test kits and spore traps around the home and can appear as black, grey, green, or brown when it grows upon a surface. Generally speaking, the only negative effects associated with Cladosporium are allergic reactions and are less serious of a threat than molds such as Penicillin, Aspergillus, and Stachybotrys. Prolonged exposure to Cladosporium, however, can cause weakened immune systems and while they do not produce any mycotoxins of any significance, they do produce some volatile organic compounds that are associated with odors.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration and other states such as
New Jersey Water Damage Restoration companies across the united states.
In the summer, spore levels can reach from 2,000 to 50,000 particles per cubic meter of air. The air and concentration of these spores in your home are influenced by two factors: the outdoor concentration and whether the mold is growing in your house or not.
In the home, Cladosporium species manifest themselves as an infection in the walls, second to Penicillium species, Aspergillus species, and Wallemia sebi. It is prevalent on building materials that have gotten wet. The four species that occur most commonly are Cladosporium herbarum, Cladosporium sphaerospermum, Cladosporium cladosporioides, and Cladosporium macrocarpum. The spores of these molds are dispersed by air currents and are extremely common in outdoor environments; when they are found indoors, they grow on surfaces where moisture is present.
The different species of this mold that occur are not generally human pathogens unless a person’s immune system has been compromised in some way. They do, however, have the tendency to cause allergic reactions in certain people. Exposure to high levels of spores can induce asthma and chronic allergies. A concentration of 3000 spores per cubic meter of air space are usually seen as being of clinical importance. Some people may react to a lower concentration of these spores depending upon their own individual sensitivity to them. Infections of the toenails and skin can occur, along with some reports of sinusitis and some pulmonary infections, but only rarely do these occur.
These species of mold are detected quite easily in mold test kits and spore traps around the home and can appear as black, grey, green, or brown when it grows upon a surface. Generally speaking, the only negative effects associated with Cladosporium are allergic reactions and are less serious of a threat than molds such as Penicillin, Aspergillus, and Stachybotrys. Prolonged exposure to Cladosporium, however, can cause weakened immune systems and while they do not produce any mycotoxins of any significance, they do produce some volatile organic compounds that are associated with odors.
Jim Corkern is a writer and promoter of quality
Connecticut water damage restoration and other states such as
New Jersey Water Damage Restoration companies across the united states.
SIDS Caused by Mold?
SIDS (Sudden Infant Death Syndrome) has been a worry on every new parent’s mind for a long time and its cause has been a mystery for just as long. Scientists all over the world claim that SIDS can happen to any infant, anywhere, any time, and there is absolutely nothing the parents can do to stop it. Most parents simply resign themselves to this and say that there is nothing that they can do to stop SIDS from occurring, but the fact is that a new study out of New Zealand claims to know the cause of it.
The answer lies within the crib the child sleeps in! The chemicals of arsenic, phosphorus, and antimony were first manufactured into crib mattresses back in the mid 1900’s and these chemicals are required by law to be in mattresses as a fire retardant. But, it is not just the mattress alone that causes the crib death, the study says. It is only when mold finds its way into the mattress that you begin to have a problem. When Scopulariopsis brevicaulis gets into one of these mattresses that has these chemicals in it, it begins to feed on them and releases them back into the air as toxic fumes or nerve gases. It is activated by heat and so when the baby sleeps on it (or especially when it has a fever), the mold begins to grow more quickly and lets the gases out into the air.
While the gas disperses almost immediately, it is still dangerous for infants to sleep on the mattresses because they are breathing too close to the surface of it. They are breathing these gases while they are still potent and this is what causes crib death.
So, what can you do? Do not use anything in the crib that contains these chemicals and wrap the mattress in plastic to keep these dangerous gases from escaping. It’s best to do this when the mattress is brand new so you know there isn’t any mold in it and if you have an old mattress that was given to you by friends or relatives to use, throw it away. There are special baby mattress wraps that you can use to wrap up your baby’s mattress, but are only available from New Zealand.
Also, use only materials such as 100% Egyptian cotton blankets for your baby to sleep on. Do not use sheepskin, polyester, anything that is quilted, padded, or filled, pillows or cushions. 100% cotton is the best thing to use.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
The answer lies within the crib the child sleeps in! The chemicals of arsenic, phosphorus, and antimony were first manufactured into crib mattresses back in the mid 1900’s and these chemicals are required by law to be in mattresses as a fire retardant. But, it is not just the mattress alone that causes the crib death, the study says. It is only when mold finds its way into the mattress that you begin to have a problem. When Scopulariopsis brevicaulis gets into one of these mattresses that has these chemicals in it, it begins to feed on them and releases them back into the air as toxic fumes or nerve gases. It is activated by heat and so when the baby sleeps on it (or especially when it has a fever), the mold begins to grow more quickly and lets the gases out into the air.
While the gas disperses almost immediately, it is still dangerous for infants to sleep on the mattresses because they are breathing too close to the surface of it. They are breathing these gases while they are still potent and this is what causes crib death.
So, what can you do? Do not use anything in the crib that contains these chemicals and wrap the mattress in plastic to keep these dangerous gases from escaping. It’s best to do this when the mattress is brand new so you know there isn’t any mold in it and if you have an old mattress that was given to you by friends or relatives to use, throw it away. There are special baby mattress wraps that you can use to wrap up your baby’s mattress, but are only available from New Zealand.
Also, use only materials such as 100% Egyptian cotton blankets for your baby to sleep on. Do not use sheepskin, polyester, anything that is quilted, padded, or filled, pillows or cushions. 100% cotton is the best thing to use.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Subscribe to:
Posts (Atom)
